Kayak Fishfinder Accessories
Accessories for Fish Finder Installation
Below is a selection of accessories for setting up your fish finder. If you can't see what you are looking for then please contact directly at the shop. If you are looking for items not listed below, please use the links below:
Fishfinders - Fishfinder Mounts - Rod Holders - Fishing Accessories - Fishing Kayaks
12v 7ah Fishfinder Battery
Fish Finder battery's ideal for kayak use with any of our Fishfinder models. (Colour of Battery may vary). Rechargable by means of a 12V trickle charger (not supplied).
Scanstrut Deck Seal - Small
Ideal for running cables through your kayak. Waterproof installation without having to remove the cable connector. Pre-drilled and Blank seals included. Small size for connectors up to 16mm / cables 2-8mm.
Scanstrut Deck Seal - Medium
Ideal for running cables through your kayak. Waterproof installation without having to remove the cable connector. Pre-drilled and Blank seals included. Medium size for connectors up to 30mm / cables 9-14mm.
Bag for Battery
Small 5 litre dry tube with a roll down dry seal. Made from a tough PVC Tarpaulin and with the easy roll down dry seal you will get a great dry bag to protect your battery inside your kayak.
Lowrance Kayak Scupper Transducer Mount
This robust mounting kit provides an excellent solution for mounting a transducer on a Kayak. The kit consists of a mounting top and base that is held in the scupper with a nylon clamping rod and wing nut. There is a foam spacer with cable cut out that fits in the scupper between the top and base. A moulded top cap clips over the wing nut to complete the assembly. The base has a multi angle clamp that holds the skimmer transducer (transducer not included).
Sikaflex EBT+ Clear Adhesive
Suitable for glueing a transducer to the inside hull of your kayak for a 'through-hull' installation. Also great for sealing any other fittings and fixings.
Fittings and Fixtures
M5 Stainless Steel Fittings For Ram Mounts
Stainless Steel 25mm long M5 bolts, washers and nyloc nuts for fitting accessories to a kayak or boat. M5 size is suitable for Ram Mount base mounts and many other applications. Supplied as a pack of 4.
M6 Stainless Steel Fittings For Scotty Mounts
Stainless Steel 25mm long M6 bolts, washers and nyloc nuts for fitting accessories to a kayak or boat. M6 size is suitable for Scotty and Railblaza base mounts and many other applications. Supplied as a pack of 4.
Well Nuts - Pack Of 4
Rubber Well Nuts for use when fitting accessories to your kayak. These self seal when tightened to the correct size hole and are ideal for fitting rod holders and fish finders. Requires 8.5 or 9.0mm drill bit for installation. Supplied as a pack of 4.